Planet ICA-310 Manual de usuario

30M Infrared Internet Camera ICA-310 User’s Manual Version: 1.00 Date: Ju

2.3 Hardware Installation 1. Fix ICA-310 to the location with wall mount fixture. 2. Plug-in Ethernet

10/57

Please click “Next” to install with original settings, or you may click “Change…” button to modify th

Please double-click the utility icon on the desktop, and then you will see the ICA-310 initial ut

2.5 IPWizard When you installed the ICA-310 on a LAN environment, you may execute IPWizard to discove

Wizard Button: If IPWizard finds your camera, Wizard button will become available. Please select the

2.6 Configure With IPWizard After pressing Installation Wizard, please key in Username and Password o

LAN: You can configure this ICA-310 to obtain its address automatically or manually assign. If ther

2.7 Using UPnP of Windows® XP™ UPnP™ is short for Universal Plug and Play, which is a networking ar

The “Control Panel” will display on the screen and double click Add or Remove Programs to continue

Copyright Copyright © 2007 by PLANET Technology Corp. All rights reserved. No part of this publicati

The following screen will appear, select Networking Services and click Details to continue. The “Ne

Please click Next to continue The program will start installing the UPnP automatically. You will se

Please click Finish to complete the UPnP installation Double-click My Network Places on the desktop

22/57 Set the first 3 items • Download the signed ActiveX controls • Download the unsigned Activ

3. Web-based Management This chapter provides setup details of the ICA-310’s Web-based Interface. 3.

Note: If the User name and Password have been changed with IPWizard, please enter the new User name a

3.3 Live View Start-up screen will be as follow no matter an ordinary users or an administrator. PTZ

PTZ Control: Click to display the following control panel: NOTE: If you want use this function, must

provides features that are unique to the ActiveX control. These features include: • “Digital Zoom”,

3.4.2 Record Click Record to activate this function. Press Record button to start recording. The vide

This equipment complies with all the requirements of DIRECTIVE 1999/5/CE OF THE EUROPEAN PARLIAMENT A

3.4.4 Statistics Click Statistics to activate this function. A window will be popup to show the s

3.5 System Setting This function is only available for user logged into ICA-310 as administrator. C

MAC address: Display the Ethernet MAC address of the device. Note that user cannot change it. Obtai

HTTP Port: The device supports two HTTP ports. The first one is default port 80 and this port is fixe

Enable DDNS: To enable or disable the DDNS service here. Server name: Choose the built-in DDNS serv

Enable PPPoE: To enable or disable the PPPoE service here. User name (PPPoE): Type the user name fo

• In Setting Î Video Î MP4/QQVGA Î Bit rate, set the maximum bit rate to 128 k bit/s. RTSP port: Ch

Enable UPnP discovery: To enable or disable the UPnP discovery service here. 36/57

3.6 Camera Use this menu to set the function of the camera of ICA-310 3.6.1 Common PTZ protocol typ

3.6.2 Picture You can adjust the camera view quality in this menu. Brightness: Large value will brig

Table of Content 1. Introduction...

Dwelling Time: Type a period of time during which the camera is to stay at each preset point, between

Synchronize with PC: Press “Set Time” button to do the time synchronization with PC time. Synchroni

8. A message will be shown while the firmware upgraded. Once the upgrading process completed, the dev

rate to 15 fps, then the image will be updated for 15 frames per second. User can set the desired max

3.8.3 MPEG4/QQVGA Video Type: It’s MPEG4 mode in this profile. Resolution: It’s QQVGA mode (160x120

3.8.4 JPEG/QVGA Video Type: It’s JPEG mode in this profile. Resolution: User can select VGA, QVGA,

3.9 User Use this menu to set the user names and password of the Administrator and up to 10 users, an

3.10 E-Mail Using E-Mail function, user can send an e-mail with attached image file that has been sho

3.11 FTP Use this menu to set up for capturing and sending still images to an FTP server. Using FTP c

Present MDD: To enable or disable the MDD (motion detection data) function. The motion object/area

3.12 Object detection...

Appendix A: Hardware Restore There is a button hidden under the ICA-310 housing. User must open the h

Appendix B: Troubleshooting & FAQ Question Answer or Resolution Features The video and audio cod

• If IP address is not assigned to the PC which running IPWizard program, then IPWizard program canno

manual for details. • Packet Filtering of the router may prohibit access from an external network.

The unreadable characters are displayed. Use the operating system of the selected language. Set the E

Appendix C: PING IP Address The PING (stands for Packet Internet Groper) command is used to detect wh

Appendix D: Bandwidth Estimation The frame rate of video transmitted from the ICA-310 depends on co

Appendix E: DDNS Application 1. Preface If you have a Cable modem or xDSL, this is a great way to hos

(3). After the columns show up at the left side, click “Create Account”. (4). Fill the applicatio

Click these two options (5). Check your e-mail mailbox. There will be an e-mail with a title “Y

1. Introduction This 30M Infrared Internet Camera is an inexpensive fully scalable surveillance tech

Click to confirm (6). Enter the web page http://www.dyndns.org/ again. Input your username and pa

(9). Click the “ Dynamic DNS ”. (10). Click the “Create Hosts”. (11). We could create a domai

61/57 1 32 4. Setup the DDNS and PPPoE of Network Device At last, users have to enter the web page

1.3 Package Contents User can find the following items in the package: 1. ICA-310 x 1 2. Power adap

2. Basic Setup This chapter provides details of installing and configuring the ICA-310 2.1 System Re

2.2 Physical Details z RS485 cables (Blue: D+ / Red: D- ) - To connect to P/T scanner. z Power