Planet WNAP-1260 Manual de usuario descargar pdf (Pagina 97)

User’s Manual of WNAP-1260

-89-

8.7.4. WDS Function

Wireless distribution system (WDS) enables interconnection between APs in an IEEE 802.11 wireless

network. It extends the wireless network through several APs, without connection of the wired

backbone network. If you want to use WDS to achieve wireless repeating or bridging, enable WDS.

Choose Wireless Settings > WDS Function and the WDS Function page is displayed.

Figure 8-27

Object Description

 Enable WDS

Function:

Enable the WDS function if you want to use this function. Note that

the WDS function cannot be enabled if the channel is set to Auto

 Enable Wireless

Clients

Association:

If not selected, the wireless basic station does not transmit any

signals to clients that are directly connected to it

 Central Base

Station:

In this mode, the router serves as a basic station to communicate

with repeaters. The basic station forwards the data of

communication between repeaters to the destination repeaters.

Repeaters should be configured accordingly. Note that a wireless

basic station can be configured with up to four repeaters.

 Repeater MAC

Address 1/2/3/4:

Enter the MAC address of the repeater

After finishing settings, click Apply to save the settings.

For WDS application description, refer to section 5.2.3. “WDS Application”.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 153 154

Sin comentarios

Planet WNAP-1260 Manual de usuario Pagina 97